- Power Input: 115 VAC, 60 HZ, .5 AMP.
- Operating Voltage
- Internal: 12 VDC
- Detection Loop: 12 VAC @ 54 HZ
- Battery Back Up (When Purchased): 12 VDC 1.2 Amp/Hr Battery with automatic Charger
- Indicators: LEDs
- Outputs: Sonalert, Form-C Contacts
AquaAlert® Water Leak Detection System-WD Series
$700.00 – $2,000.00
Water leaks can cause damage and disrupt operations at any facility where electric devices are heavily used or piping is exposed. Timely detection of leaks is imperative to protect property and prevent damage.
The WD Series is an excellent choice for a water leak detection system. Designed for use with our WDC-100 detection cable, the WD Series uses a zone approach to water leak detection. Lay the cable in the area you wish to be monitored and hook up to the system. When water is detected, the WD Series will trigger an alarm state until the alarm is cleared and the water removed. If there is trouble with the cable or end of line the WD Series will trigger a trouble state until the system is repaired and reset.
|WD-1 Series Cut Sheet|
|WD-4 Series Cut Sheet|