Water Leak Detectors WD-SD 12V Spot Water Leak Detectors The WD-SD 12v and 24v Spot Detectors are used to detect leaking water in concealed spaces. Unit requires 12 or 24vdc to operate and must be connected to a monitoring system. Sensor cable detects minute amounts of water DPDT Contacts - One set to connect to your monitoring system and another set for equipment shutdown. Specify voltage. $60.00 WD-SD 24v Spot Water Leak Detectors The WD-SD 12v and 24v Spot Detectors are used to detect leaking water in concealed spaces. Unit requires 12 or 24vdc to operate and must be connected to a monitoring system. Sensor cable detects minute amounts of water DPDT Contacts - One set to connect to your monitoring system and another set for equipment shutdown. Specify voltage. $60.00 WD-1 Water Leak Detection System This is a complete system for detecting water leaks in concealed spaces and unmanned facilities. The WD-1 is typically used under raised floors in computer rooms, telephone switches, or in basement areas. Use the system in any place where leaking water can cause damage to expensive equipment or valuable products. This system includes a control panel with power supply and battery backup, 100 feet of leak sensing cable, 20 self-stick cable clamps and instructions. $826.00 P6200p-WD Float Switch / Leak Detector This is used to detect standing water in drip pans, pump areas, around drains, or in basements. Use this anywhere that water can collect and cause damage if undetected. Requires NO power to operate Hermetically sealed magnetic contact on a non-porous float Connects to any system that monitors a dry contact (for non-inductive, low current applications) $60.00